View HT2201L_4627525.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

lcd module this is rohs compliant (176 rgb 220 dots) please kindly find and approve the specifications inserted herein and return one copy here of with your signature of approval. 2000 wyatt drive suite 6 santa clara, ca 95054 usa perpared by checked by customer application p/n approved by date approval page 1 of 24 confirmed by part no. descrition remarks HT2201L hyes optoelectronics, inc.
nov. 30, 2007 - all - 1'st issue revision history date rev. no. page summary technical specification date : nov. 30, 2007 lcm HT2201L 24 page 2 of
1. basic specifications 1.1 display specfications 1.2 mechanical specfications 1.3 outline dimension 1.4 voltage generation circuit 1.5 schematic 2. electrical characteristics 2.1 absolute maximum ratings 2.2 environmental conditions 2.3 dc characteristics 3. optical characteristics 4. interface pins 5. backlight specfications (led unit) 6. recommended software setting values (initial code) 7. power supply sequence & instruction setting 8. read/write timing characteristics (80 series mpu) 9. lcd module out-going quality level 10. the caution and handling technical specification date : nov. 30, 2007 lcm HT2201L page 3 of 24 c o n t e n t s
1. basic specfications 1.1 display specifications item description note resolution 176 rgb 220 display mode tft, normally white, transmissive viewing direction 6 o'clock driving method 528ch-source, 220ch-gate backlighting led, white (4 chips in serial) diver ic r61503u, cog others - 1.2 mechanical specifications item specification unit module size (w h t) 40.4 56.0 2.55 mm viewing area (w h) - mm active area (w h) 34.848 43.56 mm dot size (w h) 0.056 0.188 mm dot pitch (w h) 0.066 0.198 mm weight - g 262k color technical specification date : nov. 30, 2007 lcm HT2201L page 4 of 24
1.3 outline dimension technical specification date : nov. 30, 2007 lcm HT2201L page 5 of 24
1.4 block diagram technical specification date : nov. 30, 2007 lcm HT2201L page 6 of 24
1.5 schematic technical specification date : nov. 30, 2007 lcm HT2201L page 7 of 24
2. electrical characteristics 2.1 absolute maximum ratings value min. typ. max logic v cc - 0.3 - 4.6 v ta =25 lcd vgh-vgl - v ta =25 input voltage v in -0.3 - v ta =25 2-2 environmental conditions item symbol min. max. unit operating temperature topr -30 70 storage temperature tstg -40 80 2-3 dc characteristics spec. value min. typ. max. 2.72 2.8 2.88 v 1.72 1.8 1.88 v vgate vgh - vgl - - v note 1) - 2.0 4.0 ma note 2) - 2.0 4.2 ma note 3) high level v ih 0.8 iov cc - iov cc v- low level v il -0.3 - 0.2 v cc v- note 1) the value can adjusted by software to optimize display quality note 2) display white note 3) display black 95% rh max. lcm HT2201L page 8 of 24 logic vcc remark supply voltage -0.3 30 item symbol unit condition input voltage technical specification 22.0 items condition unit sysbol date : nov. 30, 2007 operating voltage supply current icc vcc + 0.3 humidity (ambient temperature=ta) ta 50
3. optical characteristics transmissive mode (ta = 25 ) item symbol min. typ. max. condition note ?=0 (y1-y2) - ?=90 (x1-x2) 90 - * ? = 0 ? , ? = 90 ? means viewing direction. * b/l is turned on. * remark : as for contrast ratio, it is measured in panel only. 300 - = 0 ? = 0 - iled=18ma uniformity 70 - - 200 240 0.24, 0.26 0.28, 0.31 w (x,y) brightness l 0.34, 0.36 - cd/m2 0.34, 0.61 0.39, 0.66 0.15, 0.10 0.20, 0.15 0.57, 0.33 0.62, 0.38 r (x,y) 0.52, 0.28 g (x,y) 0.29, 0.56 b (x,y) 0.10, 0.05 40 ms = 0 ? = 0 response time tr + tf - 25 contrast ratio cr 200 unit 50 60 80 deg cr > 10 technical specification date : nov. 30, 2007 lcm HT2201L page 9 of 24 cie coordi - nate viewing 2- 1 = 0 ? = 0
lens ? = 3mm rating is defined as the average brightness inside the viewing area 24 technical specification page 10 of date : nov. 30, 2007 lcm HT2201L y2( =180 ) top 1 x1 x2 y1( =0 ) 2 bottom note 1 . definition of angle and note 2. definition of viewing angle 1 and 2 cr 2.0 1 0 2 off on off b r igh tness 100% 90% time note 4. definition of optical response 10% t r t f note 3. definition of contrast cr 100% 0% b a non - selected dots selected dots cr=(a/b) p negative : p= -1 positive : p= +1 brightness set point voltage note 5. measuring point(9 points) (wxh) w/6 w/6 w/3 w/3 h/6 h/6 h/3 h/3
4. interface pins date : nov. 30, 2007 lcm HT2201L technical specification page 11 of 24 nc nc nc nc
5. backlight specfication (led unit) real current power dissipation operation temp. storage temp. note 1. b/l: 4ea led in serial the typical current is 18ma(full brightness) note2. total power consumpation(max) depends on led current/ led driver efficiency, etc. tstr - 40 ~ 80 - topr - 30 ~ 70 - ? note 2. i led - p d - - 350 18 20 spec. value unit condition min. typ. max. item date : nov. 30, 2007 lcm HT2201L technical specification page 12 of 24 ? note 1. symbol
6. recommended software setting values (initial code) ldi : r61503u note: hyes requires the customer to follow the above instructions strictly. if customer would like to change the above instructions, the customer should inform hyes and get re-check from hyes, or the customer will be responsible for any unexpected result because of the change. technical specification date : nov. 30, 2007 lcm HT2201L page 13 of 24
7. power supply sequence & instruction setting 7.1 power supply sequence date : nov. 30, 2007 lcm HT2201L technical specification page 14 of 24
7.2 instruction setting sequence date : nov. 30, 2007 lcm HT2201L technical specification page 15 of 24
8. read/write timing characteristics (80 series mpu) date : nov. 30, 2007 lcm HT2201L technical specification page 16 of 24
reset timing characteristics date : nov. 30, 2007 lcm HT2201L technical specification page 17 of 24
9. lcd module out-going quality level (1.0) purpose the lcd specification provides outgoing provision and its expected quality level based on our outgoing inspection of lcd. (2.0) applicable scope the lcd specification is applicable to the arrangement in regard to outgoing inspection and quality assurance after it. (3.0) quality specification (3.1) quality level the quality level of hyes are based on mil-std-105d, apply level ii, normal inspection by single sampling. rank item aql note major(ma) segment short, missing 0.4 solder bridging, cold solder outside dimension minor (mi) black spots, white spots, foreign substance, 1.0 pinhole, segment deformation, scratchs(glass & pol.) air bubbles between glass & polarizer, color variation, solder ball, misalignment note) aql- acceptable quality level (3.2) appearance standards 1) inspection conditions the lcd shall be inspected under 20w white fluorescent lamp light. the distance between the eyes and the sample shall be 30cm. all directions for inspecting the sample should be within 30 o to perpendicular line. 2) definition of the area technical specification date : nov. 30, 2007 lcm HT2201L page 18 of 24 a area b area c area a area : active area b area : viewing area c area : out of viewing area bonding area
technical specification date : nov. 30, 2007 lcm HT2201L page 19 of 24
technical specification date : nov. 30, 2007 lcm HT2201L page 20 of 24
technical specification date : nov. 30, 2007 lcm HT2201L page 21 of 24
lcm HT2201L page 22 of 24 technical specification date : nov. 30, 2007 hyes hyes
technical specification date : nov. 30, 2007 lcm HT2201L page 23 of 24 hyes hyes's hyes hyes
technical specification date : nov. 30, 2007 lcm HT2201L page 24 of 24 hyes hyes

▲Up To Search▲

Price & Availability of HT2201L

	To Download HT2201L Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .